Author Index

A

  • Adedeji, Adeola A. Optimisation of Recycled Thermoplastic Plate (Tile) [Volume 1, Issue 2, 2017, Pages 19-34]
  • Adedeji, Adeola A. Structural Response of Reinforced Self-Compacting Concrete Deep Beam using Finite Element Method [Volume 2, Issue 1, 2018, Pages 36-61]
  • Adsul, Nilam Prediction of Concrete Properties Using Multiple Linear Regression and Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 27-38]
  • Akinpelu, Mutiu Structural Response of Reinforced Self-Compacting Concrete Deep Beam using Finite Element Method [Volume 2, Issue 1, 2018, Pages 36-61]
  • Alashker, Yasser Seismic Analysis and Design of a Multi-Storey Building Located in Haql City, KSA [Volume 1, Issue 2, 2017, Pages 35-51]
  • Al-Ghafri, Intisar H.H. Comparative Analysis of Rigid Pavement using Westergaard Method and Computer Program [Volume 2, Issue 2, 2018, Pages 19-30]
  • Amini, Amin A Method for Constructing Non-Isosceles Triangular Fuzzy Numbers using Frequency Histogram and Statistical Parameters [Volume 1, Issue 1, 2017, Pages 65-85]
  • Arifuzzaman, Md Advanced ANN Prediction of Moisture Damage in CNT Modified Asphalt Binder [Volume 1, Issue 1, 2017, Pages 1-11]
  • Arora, V. K. Selection of Most Suitable Stabilized/Solidified Dredged Soil to Use in Highway Subgrade Layer Construction [Volume 3, Issue 1, 2019, Pages 1-15]
  • Aryafar, Ahmad Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Pages 101-116]
  • Azadeh, Ali Performance Evaluation of Organizations based on Human Factor Engineering Using FDEA [Volume 3, Issue 1, 2019, Pages 63-90]
  • Azimi, Alla GMDH-Network to Estimate the Punching Capacity of FRP-RC Slabs [Volume 1, Issue 1, 2017, Pages 86-92]
  • Azimi, Alla An Equation to Determine the Ultimate Flexural Load of RC Beams Strengthened with CFRP Laminates [Volume 2, Issue 4, 2018, Pages 86-95]
  • Aziz, Farah Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Pages 31-55]

B

  • Banejad, Hossein Application of ANN in Estimating Discharge Coefficient of Circular Piano Key Spillways [Volume 2, Issue 3, 2018, Pages 39-49]
  • Barati, Reza Application of adaptive Neuro-fuzzy inference system to estimate alongshore sediment transport rate (A real case study: southern shorelines of Caspian Sea) [Volume 2, Issue 4, 2018, Pages 72-85]
  • Bhamare, S. S. Process Parameter Optimization for minimizing Springback in Cold Drawing Process of Seamless Tubes using Advanced Optimization Algorithms [Volume 2, Issue 3, 2018, Pages 72-90]
  • Biswas, Srijit Selection of Most Suitable Stabilized/Solidified Dredged Soil to Use in Highway Subgrade Layer Construction [Volume 3, Issue 1, 2019, Pages 1-15]
  • Bonakdari, Hossein No-Deposition Sediment Transport in Sewers Using Gene Expression Programming [Volume 1, Issue 1, 2017, Pages 29-53]
  • Bunyamin, Salahudeen Anigilaje Cone Penetration Based Probabilistic Assessment of Shallow Foundation Settlement [Volume 2, Issue 1, 2018, Pages 85-100]
  • Bunyamin, Salahudeen Anigilaje Artificial neural networks prediction of compaction characteristics of black cotton soil stabilized with cement kiln dust [Volume 2, Issue 3, 2018, Pages 50-71]

C

  • Chandanshive, Viren Estimation of building construction cost using artificial neural networks [Volume 3, Issue 1, 2019, Pages 91-107]
  • Charhate, Shrikant Prediction of Concrete Properties Using Multiple Linear Regression and Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 27-38]
  • Chassiakos, Athanasios Evolutionary algorithm performance evaluation in project time-cost optimization [Volume 3, Issue 2, 2019, Pages 16-29]
  • Cui, Wenhua Scale Effect and Anisotropic Analysis of Rock Joint Roughness Coefficient Neutrosophic Interval Statistical Numbers Based on Neutrosophic Statistics [Volume 2, Issue 4, 2018, Pages 62-71]
  • Cui, Wenhua Slope Stability Evaluation Using Tangent Similarity Measure of Fuzzy Cube Sets [Volume 3, Issue 1, 2019, Pages 27-35]

D

  • Dahake, Ajay Flexural Analysis of Deep Aluminum Beam [Volume 2, Issue 1, 2018, Pages 71-84]
  • Deo, Makarand Artificial Neural Networks for Construction Management: A Review [Volume 1, Issue 2, 2017, Pages 70-88]
  • Dutta, Rakesh Kumar Prediction of Ultimate Bearing Capacity of Skirted Footing Resting on Sand Using Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 34-46]
  • Dutta, Rakesh Kumar Prediction of Free Swell Index for the Expansive Soil Using Artificial Neural Networks [Volume 3, Issue 1, 2019, Pages 47-62]
  • Dutta, Rakesh Application of Soft Computing Techniques in Predicting the Ultimate Bearing Capacity of Strip Footing Subjected to Eccentric Inclined Load and Resting on Sand [Volume 3, Issue 2, 2019, Pages 30-43]
  • Dutta, Rakesh Kumar Application of random forest regression in the Prediction of ultimate bearing capacity of strip footing resting on dense sand overlying loose sand deposit [(Articles in Press)]

E

  • Eberemu, Adrian O. Artificial neural networks prediction of compaction characteristics of black cotton soil stabilized with cement kiln dust [Volume 2, Issue 3, 2018, Pages 50-71]
  • Ebtehaj, Isa No-Deposition Sediment Transport in Sewers Using Gene Expression Programming [Volume 1, Issue 1, 2017, Pages 29-53]
  • Elbeltagi, Emad Developing Four Metaheuristic Algorithms for Multiple-Objective Management of Groundwater [Volume 2, Issue 4, 2018, Pages 1-22]
  • El-Ghandour, Hamdy Ahmed Developing Four Metaheuristic Algorithms for Multiple-Objective Management of Groundwater [Volume 2, Issue 4, 2018, Pages 1-22]
  • Elhadi, Khalid Seismic Analysis and Design of a Multi-Storey Building Located in Haql City, KSA [Volume 1, Issue 2, 2017, Pages 35-51]
  • Esmailzadeh, Akbar Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Pages 101-116]
  • Esmailzadeh, Akbar Connectivity and Flowrate Estimation of Discrete Fracture Network Using Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 13-26]

F

  • Farahnaki, Reza The Application of Particle Swarm Optimization and Artificial Neural Networks to Estimating the Strength of Reinforced Concrete Flexural Members [Volume 1, Issue 2, 2017, Pages 1-7]
  • Farahnaki, Reza An Equation to Determine the Ultimate Flexural Load of RC Beams Strengthened with CFRP Laminates [Volume 2, Issue 4, 2018, Pages 86-95]

G

  • Gavraskar, Seema Stream Flow Forecasting using Least Square Support Vector Regression [Volume 2, Issue 2, 2018, Pages 56-88]
  • Gokkus, Umit Prediction of Concrete and Steel Materials Contained by Cantilever Retaining Wall by Modeling the Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 47-61]
  • Gopalakrishnan, Kasthurirangan Predicting Budget from Transportation Research Grant Description: An Exploratory Analysis of Text Mining and Machine Learning Techniques [Volume 1, Issue 2, 2017, Pages 89-102]
  • Gupta, Anjali Selection of Most Suitable Stabilized/Solidified Dredged Soil to Use in Highway Subgrade Layer Construction [Volume 3, Issue 1, 2019, Pages 1-15]

H

  • Hashempour, Masoumeh Using of Backpropagation Neural Network in Estimation of Compressive Strength of Waste Concrete [Volume 1, Issue 1, 2017, Pages 54-64]
  • Heidari, Ali Using of Backpropagation Neural Network in Estimation of Compressive Strength of Waste Concrete [Volume 1, Issue 1, 2017, Pages 54-64]
  • Heidari, Ali Optimum Design of Structures Against earthquake by Simulated Annealing Using Wavelet Transform [Volume 2, Issue 4, 2018, Pages 23-33]
  • Heydari, Majid Application of ANN in Estimating Discharge Coefficient of Circular Piano Key Spillways [Volume 2, Issue 3, 2018, Pages 39-49]
  • Hosseini, Ghazal Capacity Prediction of RC Beams Strengthened with FRP by Artificial Neural Networks Based on Genetic Algorithm [Volume 1, Issue 1, 2017, Pages 93-98]
  • Hosseinzadeh Gharehgheshlagh, Hojjat Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Pages 101-116]

I

  • Ibrahim, Khalid Modeling of Compressive Strength Characteristics of Structural-sized Afara (Terminalia superba) and Babo (Isoberlinia doka) Timber Columns Using Constant Failure Rate (CFR) Model of Reliability [Volume 2, Issue 2, 2018, Pages 102-115]
  • Ijimdiya, Thomas S. Artificial neural networks prediction of compaction characteristics of black cotton soil stabilized with cement kiln dust [Volume 2, Issue 3, 2018, Pages 50-71]
  • Ilkhani, Mohammad Hosein Calculation of Torsion Capacity of the Reinforced Concrete Beams Using Artificial Neural Network [Volume 1, Issue 2, 2017, Pages 8-18]
  • Ismaeil, Mohammed Seismic Analysis and Design of a Multi-Storey Building Located in Haql City, KSA [Volume 1, Issue 2, 2017, Pages 35-51]

J

  • Javid, Muhammad Comparative Analysis of Rigid Pavement using Westergaard Method and Computer Program [Volume 2, Issue 2, 2018, Pages 19-30]
  • Jiang, Wenzhong Scale Effect and Anisotropic Analysis of Rock Joint Roughness Coefficient Neutrosophic Interval Statistical Numbers Based on Neutrosophic Statistics [Volume 2, Issue 4, 2018, Pages 62-71]
  • Jimoh, Alao Abdullahi Optimisation of Recycled Thermoplastic Plate (Tile) [Volume 1, Issue 2, 2017, Pages 19-34]
  • Jimoh, Alao Abdullahi Modeling of Compressive Strength Characteristics of Structural-sized Afara (Terminalia superba) and Babo (Isoberlinia doka) Timber Columns Using Constant Failure Rate (CFR) Model of Reliability [Volume 2, Issue 2, 2018, Pages 102-115]

K

  • Kalwane, Uttam Flexural Analysis of Deep Aluminum Beam [Volume 2, Issue 1, 2018, Pages 71-84]
  • Kamali, Abbas Connectivity and Flowrate Estimation of Discrete Fracture Network Using Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 13-26]
  • Kambekar, Ajay R Estimation of building construction cost using artificial neural networks [Volume 3, Issue 1, 2019, Pages 91-107]
  • Kapdis, Pravin Flexural Analysis of Deep Aluminum Beam [Volume 2, Issue 1, 2018, Pages 71-84]
  • Karanjule, Dadabhau Baban Process Parameter Optimization for minimizing Springback in Cold Drawing Process of Seamless Tubes using Advanced Optimization Algorithms [Volume 2, Issue 3, 2018, Pages 72-90]
  • Karim, Izian Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Pages 31-55]
  • Kashkaki, Zahra Application of ANN in Estimating Discharge Coefficient of Circular Piano Key Spillways [Volume 2, Issue 3, 2018, Pages 39-49]
  • Keshavarz, Zahra Application of ANN and ANFIS Models in Determining Compressive Strength of Concrete [Volume 2, Issue 1, 2018, Pages 62-70]
  • Khaitan, Siddhartha K. Predicting Budget from Transportation Research Grant Description: An Exploratory Analysis of Text Mining and Machine Learning Techniques [Volume 1, Issue 2, 2017, Pages 89-102]
  • Khatri, Vishwas Nandakishor Application of Soft Computing Techniques in Predicting the Ultimate Bearing Capacity of Strip Footing Subjected to Eccentric Inclined Load and Resting on Sand [Volume 3, Issue 2, 2019, Pages 30-43]
  • Kulkarni, Preeti Artificial Neural Networks for Construction Management: A Review [Volume 1, Issue 2, 2017, Pages 70-88]

L

  • Lataniotis, Christos The Gaussian process modelling module in UQLab [Volume 2, Issue 3, 2018, Pages 91-116]
  • Lavasani, Mohammad Calculation of Torsion Capacity of the Reinforced Concrete Beams Using Artificial Neural Network [Volume 1, Issue 2, 2017, Pages 8-18]
  • Law, Teik Hua Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Pages 31-55]
  • Leiva-Villacorta, Fabricio Neural Network based model to Estimate Dynamic Modulus E* for mixtures in Costa Rica [Volume 3, Issue 2, 2019, Pages 1-15]
  • Londhe, Shreenivas Artificial Neural Networks for Construction Management: A Review [Volume 1, Issue 2, 2017, Pages 70-88]
  • Londhe, Shreenivas Stream Flow Forecasting using Least Square Support Vector Regression [Volume 2, Issue 2, 2018, Pages 56-88]

M

  • Marelli, Stefano The Gaussian process modelling module in UQLab [Volume 2, Issue 3, 2018, Pages 91-116]
  • Mathews IV, Grady An Interior-Constraint BEM for Regularization of Problems with Improper Boundary Conditions [Volume 2, Issue 2, 2018, Pages 1-18]
  • Mehar, Arpan Development of MLR, ANN and ANFIS Models for Estimation of PCUs at Different Levels of Service [Volume 2, Issue 1, 2018, Pages 18-35]
  • Mikaeil, Reza Development of Intelligent Systems to Predict Diamond Wire Saw Performance [Volume 1, Issue 2, 2017, Pages 52-69]
  • Mikaeil, Reza Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Pages 101-116]
  • Mikaeil, Reza Connectivity and Flowrate Estimation of Discrete Fracture Network Using Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 13-26]
  • Mikaeil, Reza Site selection for limestone paper plant using AHP-Monte Carlo approach [Volume 3, Issue 1, 2019, Pages 36-46]
  • Mirrashid, Masoomeh Comparison Study of Soft Computing Approaches for Estimation of the Non-Ductile RC Joint Shear Strength [Volume 1, Issue 1, 2017, Pages 12-28]
  • Mirrashid, Masoomeh A Neuro-Fuzzy Model for Punching Shear Prediction of Slab-Column Connections Reinforced with FRP [Volume 3, Issue 1, 2019, Pages 16-26]
  • Mohammed, Kachalla Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Pages 31-55]
  • Moradi, Ehsan Calculation of Torsion Capacity of the Reinforced Concrete Beams Using Artificial Neural Network [Volume 1, Issue 2, 2017, Pages 8-18]
  • Mullen, Robert An Interior-Constraint BEM for Regularization of Problems with Improper Boundary Conditions [Volume 2, Issue 2, 2018, Pages 1-18]
  • Muradova, Aliki Fuzzy Vibration Suppression of a Smart Elastic Plate using Graphical Computing Environment [Volume 2, Issue 1, 2018, Pages 1-17]

N

  • Naderpour, Hosein A Neuro-Fuzzy Model for Punching Shear Prediction of Slab-Column Connections Reinforced with FRP [Volume 3, Issue 1, 2019, Pages 16-26]
  • Nikraz, Navid A Method for Constructing Non-Isosceles Triangular Fuzzy Numbers using Frequency Histogram and Statistical Parameters [Volume 1, Issue 1, 2017, Pages 65-85]

O

  • Olivier, Lonping Tazou Optimisation of Recycled Thermoplastic Plate (Tile) [Volume 1, Issue 2, 2017, Pages 19-34]
  • Osinubi, Kolawole J. Artificial neural networks prediction of compaction characteristics of black cotton soil stabilized with cement kiln dust [Volume 2, Issue 3, 2018, Pages 50-71]
  • Ozcelik, Yilmaz Development of Intelligent Systems to Predict Diamond Wire Saw Performance [Volume 1, Issue 2, 2017, Pages 52-69]

R

  • Raeisi, Jalil Optimum Design of Structures Against earthquake by Simulated Annealing Using Wavelet Transform [Volume 2, Issue 4, 2018, Pages 23-33]
  • Rahmon, Rauf Modeling of Compressive Strength Characteristics of Structural-sized Afara (Terminalia superba) and Babo (Isoberlinia doka) Timber Columns Using Constant Failure Rate (CFR) Model of Reliability [Volume 2, Issue 2, 2018, Pages 102-115]
  • Rani, Radha Prediction of Ultimate Bearing Capacity of Skirted Footing Resting on Sand Using Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 34-46]
  • Rao, Tammineni Gnanananda Prediction of Ultimate Bearing Capacity of Skirted Footing Resting on Sand Using Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 34-46]
  • Rao, Tammineni Gnanananda Prediction of Free Swell Index for the Expansive Soil Using Artificial Neural Networks [Volume 3, Issue 1, 2019, Pages 47-62]
  • Rao, Tammineni Gnanananda Application of Soft Computing Techniques in Predicting the Ultimate Bearing Capacity of Strip Footing Subjected to Eccentric Inclined Load and Resting on Sand [Volume 3, Issue 2, 2019, Pages 30-43]
  • Rao, Tammineni Gnanananda Application of random forest regression in the Prediction of ultimate bearing capacity of strip footing resting on dense sand overlying loose sand deposit [(Articles in Press)]
  • Rao, Tianrong H Process Parameter Optimization for minimizing Springback in Cold Drawing Process of Seamless Tubes using Advanced Optimization Algorithms [Volume 2, Issue 3, 2018, Pages 72-90]
  • Rempis, George Evolutionary algorithm performance evaluation in project time-cost optimization [Volume 3, Issue 2, 2019, Pages 16-29]
  • Rizos, Dimitris An Interior-Constraint BEM for Regularization of Problems with Improper Boundary Conditions [Volume 2, Issue 2, 2018, Pages 1-18]
  • Romero, Raymundo Vargas An Analysis of Sight Distances Considering Both the Vertical and Horizontal Curves of a Tourist Bound Destination Highway in Camarines Sur: The Lagonoy-Presentacion Section [Volume 2, Issue 2, 2018, Pages 116-126]

S

  • Sadegheslam, Golsa Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Pages 101-116]
  • Sadeghifar, Tayeb Application of adaptive Neuro-fuzzy inference system to estimate alongshore sediment transport rate (A real case study: southern shorelines of Caspian Sea) [Volume 2, Issue 4, 2018, Pages 72-85]
  • Salunkhe, Umesh Flexural Analysis of Deep Aluminum Beam [Volume 2, Issue 1, 2018, Pages 71-84]
  • Samuel, Abejide O MODELLING OF CONCRETE COMPRESSIVE STRENGTH ADMIXED WITH GGBFS USING GENE EXPRESSION PROGRAMMING [Volume 3, Issue 2, 2019, Pages 44-58]
  • Shaffiee Haghshenas, Sami Development of Intelligent Systems to Predict Diamond Wire Saw Performance [Volume 1, Issue 2, 2017, Pages 52-69]
  • Shaffiee Haghshenas, Sina Development of Intelligent Systems to Predict Diamond Wire Saw Performance [Volume 1, Issue 2, 2017, Pages 52-69]
  • Shahmoradi Qomi, Hamidreza Reliability Analysis of Structures Using Modified FA_PSO Algorithm [Volume 2, Issue 2, 2018, Pages 89-101]
  • Shahriar, Kurosh Connectivity and Flowrate Estimation of Discrete Fracture Network Using Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 13-26]
  • Shahsavani, Hashem Site selection for limestone paper plant using AHP-Monte Carlo approach [Volume 3, Issue 1, 2019, Pages 36-46]
  • Sharma, Ajay Application of random forest regression in the Prediction of ultimate bearing capacity of strip footing resting on dense sand overlying loose sand deposit [(Articles in Press)]
  • Singh, Ajay Prediction of Free Swell Index for the Expansive Soil Using Artificial Neural Networks [Volume 3, Issue 1, 2019, Pages 47-62]
  • Singhal, Ayush Predicting Budget from Transportation Research Grant Description: An Exploratory Analysis of Text Mining and Machine Learning Techniques [Volume 1, Issue 2, 2017, Pages 89-102]
  • Solang, Uwera Refined Simplified Neutrosophic Similarity Measures Based on Trigonometric Function and Their Application in Construction Project Decision-Making [Volume 2, Issue 3, 2018, Pages 1-12]
  • Soltanpoor Gharibdousti, Maryam Performance Evaluation of Organizations based on Human Factor Engineering Using FDEA [Volume 3, Issue 1, 2019, Pages 63-90]
  • Srikanth, Seelam Development of MLR, ANN and ANFIS Models for Estimation of PCUs at Different Levels of Service [Volume 2, Issue 1, 2018, Pages 18-35]
  • Stavroulakis, Georgios Fuzzy Vibration Suppression of a Smart Elastic Plate using Graphical Computing Environment [Volume 2, Issue 1, 2018, Pages 1-17]
  • Subhedar, Mansi Prediction of Concrete Properties Using Multiple Linear Regression and Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 27-38]
  • Sudret, Bruno The Gaussian process modelling module in UQLab [Volume 2, Issue 3, 2018, Pages 91-116]

T

  • Taheri, Majid Reliability Analysis of Structures Using Modified FA_PSO Algorithm [Volume 2, Issue 2, 2018, Pages 89-101]
  • Tairidis, Georgios Fuzzy Vibration Suppression of a Smart Elastic Plate using Graphical Computing Environment [Volume 2, Issue 1, 2018, Pages 1-17]
  • Tavakoli, Davoud Using of Backpropagation Neural Network in Estimation of Compressive Strength of Waste Concrete [Volume 1, Issue 1, 2017, Pages 54-64]
  • Torkian, Hojjatollah Application of ANN and ANFIS Models in Determining Compressive Strength of Concrete [Volume 2, Issue 1, 2018, Pages 62-70]

V

  • Vafaei, Sahele Site selection for limestone paper plant using AHP-Monte Carlo approach [Volume 3, Issue 1, 2019, Pages 36-46]
  • Vargas-Nordcbeck, Adriana Neural Network based model to Estimate Dynamic Modulus E* for mixtures in Costa Rica [Volume 3, Issue 2, 2019, Pages 1-15]
  • Voitenko, Pavlo Reliability Analysis of Structures Using Modified FA_PSO Algorithm [Volume 2, Issue 2, 2018, Pages 89-101]

W

  • Wang, Jingmeng Slope Stability Evaluation Using Tangent Similarity Measure of Fuzzy Cube Sets [Volume 3, Issue 1, 2019, Pages 27-35]

Y

  • Ye, Jun Refined Simplified Neutrosophic Similarity Measures Based on Trigonometric Function and Their Application in Construction Project Decision-Making [Volume 2, Issue 3, 2018, Pages 1-12]
  • Ye, Jun Scale Effect and Anisotropic Analysis of Rock Joint Roughness Coefficient Neutrosophic Interval Statistical Numbers Based on Neutrosophic Statistics [Volume 2, Issue 4, 2018, Pages 62-71]
  • Ye, Jun Slope Stability Evaluation Using Tangent Similarity Measure of Fuzzy Cube Sets [Volume 3, Issue 1, 2019, Pages 27-35]
  • Yildirim, Mehmet Prediction of Concrete and Steel Materials Contained by Cantilever Retaining Wall by Modeling the Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 47-61]
  • Yilmazoglu, Arif Prediction of Concrete and Steel Materials Contained by Cantilever Retaining Wall by Modeling the Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 47-61]
  • Yousef, Isam Eldin Seismic Analysis and Design of a Multi-Storey Building Located in Haql City, KSA [Volume 1, Issue 2, 2017, Pages 35-51]