A
-
Afara
Modeling of Compressive Strength Characteristics of Structural-sized Afara (Terminalia superba) and Babo (Isoberlinia doka) Timber Columns Using Constant Failure Rate (CFR) Model of Reliability [Volume 2, Issue 2, 2018, Pages 102-115]
-
Alongshore sediment transports rate
Application of Adaptive Neuro-Fuzzy Inference System to Estimate Alongshore Sediment Transport Rate (A Real Case Study: Southern Shorelines of Caspian Sea) [Volume 2, Issue 4, 2018, Pages 72-85]
-
Aluminum
Flexural Analysis of Deep Aluminum Beam [Volume 2, Issue 1, 2018, Pages 71-84]
-
ANFIS
Development of MLR, ANN and ANFIS Models for Estimation of PCUs at Different Levels of Service [Volume 2, Issue 1, 2018, Pages 18-35]
-
Anisotropy
Scale Effect and Anisotropic Analysis of Rock Joint Roughness Coefficient Neutrosophic Interval Statistical Numbers Based on Neutrosophic Statistics [Volume 2, Issue 4, 2018, Pages 62-71]
-
ANN
Development of MLR, ANN and ANFIS Models for Estimation of PCUs at Different Levels of Service [Volume 2, Issue 1, 2018, Pages 18-35]
-
ANN
Application of ANN in Estimating Discharge Coefficient of Circular Piano Key Spillways [Volume 2, Issue 3, 2018, Pages 39-49]
-
Approximate solutions
An Interior-Constraint BEM for Regularization of Problems with Improper Boundary Conditions [Volume 2, Issue 2, 2018, Pages 1-18]
-
Artificial Bee Colony-Based Preliminary Wall Design
Prediction of Concrete and Steel Materials Contained by Cantilever Retaining Wall by Modeling the Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 47-61]
-
Artificial Neural Network
Application of ANN and ANFIS Models in Determining Compressive Strength of Concrete [Volume 2, Issue 1, 2018, Pages 62-70]
-
Artificial Neural Network
Connectivity and Flowrate Estimation of Discrete Fracture Network Using Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 13-26]
-
Artificial Neural Network
Prediction of Concrete Properties Using Multiple Linear Regression and Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 27-38]
-
Artificial Neural Network
Prediction of Ultimate Bearing Capacity of Skirted Footing Resting on Sand Using Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 34-46]
-
Artificial Neural Networks
Artificial Neural Networks Prediction of Compaction Characteristics of Black Cotton Soil Stabilized with Cement Kiln Dust [Volume 2, Issue 3, 2018, Pages 50-71]
B
-
Babo
Modeling of Compressive Strength Characteristics of Structural-sized Afara (Terminalia superba) and Babo (Isoberlinia doka) Timber Columns Using Constant Failure Rate (CFR) Model of Reliability [Volume 2, Issue 2, 2018, Pages 102-115]
-
Black cotton soil
Artificial Neural Networks Prediction of Compaction Characteristics of Black Cotton Soil Stabilized with Cement Kiln Dust [Volume 2, Issue 3, 2018, Pages 50-71]
-
Boundary element method
An Interior-Constraint BEM for Regularization of Problems with Improper Boundary Conditions [Volume 2, Issue 2, 2018, Pages 1-18]
C
-
Caspian Sea
Application of Adaptive Neuro-Fuzzy Inference System to Estimate Alongshore Sediment Transport Rate (A Real Case Study: Southern Shorelines of Caspian Sea) [Volume 2, Issue 4, 2018, Pages 72-85]
-
Cement kiln dust
Artificial Neural Networks Prediction of Compaction Characteristics of Black Cotton Soil Stabilized with Cement Kiln Dust [Volume 2, Issue 3, 2018, Pages 50-71]
-
Circular Piano Key Spillway
Application of ANN in Estimating Discharge Coefficient of Circular Piano Key Spillways [Volume 2, Issue 3, 2018, Pages 39-49]
-
Cold drawing
Process Parameter Optimization for Minimizing Springback in Cold Drawing Process of Seamless Tubes Using Advanced Optimization Algorithms [Volume 2, Issue 3, 2018, Pages 72-90]
-
Compressive strength
Application of ANN and ANFIS Models in Determining Compressive Strength of Concrete [Volume 2, Issue 1, 2018, Pages 62-70]
-
Compressive strength
Modeling of Compressive Strength Characteristics of Structural-sized Afara (Terminalia superba) and Babo (Isoberlinia doka) Timber Columns Using Constant Failure Rate (CFR) Model of Reliability [Volume 2, Issue 2, 2018, Pages 102-115]
-
Compressive strength
Prediction of Concrete Properties Using Multiple Linear Regression and Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 27-38]
-
Compromise solution
Developing Four Metaheuristic Algorithms for Multiple-Objective Management of Groundwater [Volume 2, Issue 4, 2018, Pages 1-22]
-
Computational algorithm
Fuzzy Vibration Suppression of a Smart Elastic Plate Using Graphical Computing Environment [Volume 2, Issue 1, 2018, Pages 1-17]
-
Concrete damage plasticity
Structural Response of Reinforced Self-Compacting Concrete Deep Beam Using Finite Element Method [Volume 2, Issue 1, 2018, Pages 36-61]
-
Concrete volume and steel area in wall design
Prediction of Concrete and Steel Materials Contained by Cantilever Retaining Wall by Modeling the Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 47-61]
-
Cone penetration test
Cone Penetration Based Probabilistic Assessment of Shallow Foundation Settlement [Volume 2, Issue 1, 2018, Pages 85-100]
-
Curling Stresses
Comparative Analysis of Rigid Pavement Using Westergaard Method and Computer Program [Volume 2, Issue 2, 2018, Pages 19-30]
D
-
Deep beam
Flexural Analysis of Deep Aluminum Beam [Volume 2, Issue 1, 2018, Pages 71-84]
-
Deep beam
Structural Response of Reinforced Self-Compacting Concrete Deep Beam Using Finite Element Method [Volume 2, Issue 1, 2018, Pages 36-61]
-
Deflections
Flexural Analysis of Deep Aluminum Beam [Volume 2, Issue 1, 2018, Pages 71-84]
-
Deformations
Flexural Analysis of Deep Aluminum Beam [Volume 2, Issue 1, 2018, Pages 71-84]
-
Different regular shaped skirted footings
Prediction of Ultimate Bearing Capacity of Skirted Footing Resting on Sand Using Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 34-46]
-
Dimensional stone
Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Pages 101-116]
-
Discharge coefficient
Application of ANN in Estimating Discharge Coefficient of Circular Piano Key Spillways [Volume 2, Issue 3, 2018, Pages 39-49]
-
Discrete fracture network (DFN)
Connectivity and Flowrate Estimation of Discrete Fracture Network Using Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 13-26]
-
Discrete Wavelet transform
Optimum Design of Structures for Seismic Loading by Simulated Annealing Using Wavelet Transform [Volume 2, Issue 4, 2018, Pages 23-33]
-
Dynamic analysis
Optimum Design of Structures for Seismic Loading by Simulated Annealing Using Wavelet Transform [Volume 2, Issue 4, 2018, Pages 23-33]
E
-
Engineering Problems
Reliability Analysis of Structures Using Modified FA-PSO Algorithm [Volume 2, Issue 2, 2018, Pages 89-101]
F
-
Feed forward backpropagation algorithm
Prediction of Ultimate Bearing Capacity of Skirted Footing Resting on Sand Using Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 34-46]
-
FEM
Structural Response of Reinforced Self-Compacting Concrete Deep Beam Using Finite Element Method [Volume 2, Issue 1, 2018, Pages 36-61]
-
First order reliability method
Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Pages 31-55]
-
Flexural load
An Equation to Determine the Ultimate Flexural Load of RC Beams Strengthened with CFRP Laminates [Volume 2, Issue 4, 2018, Pages 86-95]
-
Foundation settlement
Cone Penetration Based Probabilistic Assessment of Shallow Foundation Settlement [Volume 2, Issue 1, 2018, Pages 85-100]
-
FRP
An Equation to Determine the Ultimate Flexural Load of RC Beams Strengthened with CFRP Laminates [Volume 2, Issue 4, 2018, Pages 86-95]
-
Fuzzy Delphi
Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Pages 101-116]
G
-
Gaussian process modeling
The Gaussian Process Modeling Module in UQLab [Volume 2, Issue 3, 2018, Pages 91-116]
-
Genetic Algorithm
Process Parameter Optimization for Minimizing Springback in Cold Drawing Process of Seamless Tubes Using Advanced Optimization Algorithms [Volume 2, Issue 3, 2018, Pages 72-90]
-
Genetic Algorithms
Developing Four Metaheuristic Algorithms for Multiple-Objective Management of Groundwater [Volume 2, Issue 4, 2018, Pages 1-22]
H
-
Highway
An Analysis of Sight Distances Considering Both the Vertical and Horizontal Curves of a Tourist Bound Destination Highway in Camarines Sur: The Lagonoy-Presentacion Section [Volume 2, Issue 2, 2018, Pages 116-126]
-
Horizontal curve
An Analysis of Sight Distances Considering Both the Vertical and Horizontal Curves of a Tourist Bound Destination Highway in Camarines Sur: The Lagonoy-Presentacion Section [Volume 2, Issue 2, 2018, Pages 116-126]
I
-
Inverse T-Shaped Retaining Walls
Prediction of Concrete and Steel Materials Contained by Cantilever Retaining Wall by Modeling the Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 47-61]
J
-
Joint roughness coefficient (JRC)
Scale Effect and Anisotropic Analysis of Rock Joint Roughness Coefficient Neutrosophic Interval Statistical Numbers Based on Neutrosophic Statistics [Volume 2, Issue 4, 2018, Pages 62-71]
K
-
Kernel function
Stream Flow Forecasting Using Least Square Support Vector Regression [Volume 2, Issue 2, 2018, Pages 56-88]
-
Kriging
The Gaussian Process Modeling Module in UQLab [Volume 2, Issue 3, 2018, Pages 91-116]
L
-
Limit State Function
Reliability Analysis of Structures Using Modified FA-PSO Algorithm [Volume 2, Issue 2, 2018, Pages 89-101]
-
Longitudinal shear
Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Pages 31-55]
M
-
MATLAB
The Gaussian Process Modeling Module in UQLab [Volume 2, Issue 3, 2018, Pages 91-116]
-
Maximum dry density
Artificial Neural Networks Prediction of Compaction Characteristics of Black Cotton Soil Stabilized with Cement Kiln Dust [Volume 2, Issue 3, 2018, Pages 50-71]
-
Maximum speed
An Analysis of Sight Distances Considering Both the Vertical and Horizontal Curves of a Tourist Bound Destination Highway in Camarines Sur: The Lagonoy-Presentacion Section [Volume 2, Issue 2, 2018, Pages 116-126]
-
Memetic algorithms
Developing Four Metaheuristic Algorithms for Multiple-Objective Management of Groundwater [Volume 2, Issue 4, 2018, Pages 1-22]
-
MLR
Development of MLR, ANN and ANFIS Models for Estimation of PCUs at Different Levels of Service [Volume 2, Issue 1, 2018, Pages 18-35]
-
Modified FA-PSO algorithm
Reliability Analysis of Structures Using Modified FA-PSO Algorithm [Volume 2, Issue 2, 2018, Pages 89-101]
-
Multi-criteria decision making
Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Pages 101-116]
-
Multiple linear regression
Prediction of Concrete Properties Using Multiple Linear Regression and Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 27-38]
-
Multiple objectives optimization
Developing Four Metaheuristic Algorithms for Multiple-Objective Management of Groundwater [Volume 2, Issue 4, 2018, Pages 1-22]
-
Multiple Regression Analysis
Prediction of Ultimate Bearing Capacity of Skirted Footing Resting on Sand Using Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 34-46]
N
-
Neutrosophic interval probability
Scale Effect and Anisotropic Analysis of Rock Joint Roughness Coefficient Neutrosophic Interval Statistical Numbers Based on Neutrosophic Statistics [Volume 2, Issue 4, 2018, Pages 62-71]
-
Neutrosophic interval statistical number
Scale Effect and Anisotropic Analysis of Rock Joint Roughness Coefficient Neutrosophic Interval Statistical Numbers Based on Neutrosophic Statistics [Volume 2, Issue 4, 2018, Pages 62-71]
-
Neutrosophic statistics
Scale Effect and Anisotropic Analysis of Rock Joint Roughness Coefficient Neutrosophic Interval Statistical Numbers Based on Neutrosophic Statistics [Volume 2, Issue 4, 2018, Pages 62-71]
-
Noor coastal
Application of Adaptive Neuro-Fuzzy Inference System to Estimate Alongshore Sediment Transport Rate (A Real Case Study: Southern Shorelines of Caspian Sea) [Volume 2, Issue 4, 2018, Pages 72-85]
O
-
Optimum moisture content
Artificial Neural Networks Prediction of Compaction Characteristics of Black Cotton Soil Stabilized with Cement Kiln Dust [Volume 2, Issue 3, 2018, Pages 50-71]
P
-
Papaya Spillway
Application of ANN in Estimating Discharge Coefficient of Circular Piano Key Spillways [Volume 2, Issue 3, 2018, Pages 39-49]
-
Particle swarm
Developing Four Metaheuristic Algorithms for Multiple-Objective Management of Groundwater [Volume 2, Issue 4, 2018, Pages 1-22]
-
Particle Swarm Optimization
Process Parameter Optimization for Minimizing Springback in Cold Drawing Process of Seamless Tubes Using Advanced Optimization Algorithms [Volume 2, Issue 3, 2018, Pages 72-90]
-
PCU
Development of MLR, ANN and ANFIS Models for Estimation of PCUs at Different Levels of Service [Volume 2, Issue 1, 2018, Pages 18-35]
-
Prediction models
Application of ANN and ANFIS Models in Determining Compressive Strength of Concrete [Volume 2, Issue 1, 2018, Pages 62-70]
-
Prediction with neural network
Prediction of Concrete and Steel Materials Contained by Cantilever Retaining Wall by Modeling the Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 47-61]
-
Profiled composite slab
Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Pages 31-55]
R
-
Refined simplified neutrosophic set
Refined Simplified Neutrosophic Similarity Measures Based on Trigonometric Function and Their Application in Construction Project Decision-Making [Volume 2, Issue 3, 2018, Pages 1-12]
-
Regularization
An Interior-Constraint BEM for Regularization of Problems with Improper Boundary Conditions [Volume 2, Issue 2, 2018, Pages 1-18]
-
Reliability
Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Pages 31-55]
-
Reliability
Modeling of Compressive Strength Characteristics of Structural-sized Afara (Terminalia superba) and Babo (Isoberlinia doka) Timber Columns Using Constant Failure Rate (CFR) Model of Reliability [Volume 2, Issue 2, 2018, Pages 102-115]
-
Reliability-based design
Cone Penetration Based Probabilistic Assessment of Shallow Foundation Settlement [Volume 2, Issue 1, 2018, Pages 85-100]
-
Reliability Index
Reliability Analysis of Structures Using Modified FA-PSO Algorithm [Volume 2, Issue 2, 2018, Pages 89-101]
-
Reverse Wavelet Transform
Optimum Design of Structures for Seismic Loading by Simulated Annealing Using Wavelet Transform [Volume 2, Issue 4, 2018, Pages 23-33]
-
Rigid body motion constrains
An Interior-Constraint BEM for Regularization of Problems with Improper Boundary Conditions [Volume 2, Issue 2, 2018, Pages 1-18]
-
Rigid pavement
Comparative Analysis of Rigid Pavement Using Westergaard Method and Computer Program [Volume 2, Issue 2, 2018, Pages 19-30]
-
Rock mass
Connectivity and Flowrate Estimation of Discrete Fracture Network Using Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 13-26]
S
-
Safety index
Cone Penetration Based Probabilistic Assessment of Shallow Foundation Settlement [Volume 2, Issue 1, 2018, Pages 85-100]
-
Scale effect
Scale Effect and Anisotropic Analysis of Rock Joint Roughness Coefficient Neutrosophic Interval Statistical Numbers Based on Neutrosophic Statistics [Volume 2, Issue 4, 2018, Pages 62-71]
-
Self-Compacting Concrete
Structural Response of Reinforced Self-Compacting Concrete Deep Beam Using Finite Element Method [Volume 2, Issue 1, 2018, Pages 36-61]
-
Semi-empirical formula
Application of Adaptive Neuro-Fuzzy Inference System to Estimate Alongshore Sediment Transport Rate (A Real Case Study: Southern Shorelines of Caspian Sea) [Volume 2, Issue 4, 2018, Pages 72-85]
-
Shuffled frog leaping
Developing Four Metaheuristic Algorithms for Multiple-Objective Management of Groundwater [Volume 2, Issue 4, 2018, Pages 1-22]
-
Sight distance
An Analysis of Sight Distances Considering Both the Vertical and Horizontal Curves of a Tourist Bound Destination Highway in Camarines Sur: The Lagonoy-Presentacion Section [Volume 2, Issue 2, 2018, Pages 116-126]
-
Simulated Annealing
Optimum Design of Structures for Seismic Loading by Simulated Annealing Using Wavelet Transform [Volume 2, Issue 4, 2018, Pages 23-33]
-
Simulated Annealing
Process Parameter Optimization for Minimizing Springback in Cold Drawing Process of Seamless Tubes Using Advanced Optimization Algorithms [Volume 2, Issue 3, 2018, Pages 72-90]
-
SIMULINK diagrams
Fuzzy Vibration Suppression of a Smart Elastic Plate Using Graphical Computing Environment [Volume 2, Issue 1, 2018, Pages 1-17]
-
Slope-intercept method
Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Pages 31-55]
-
Slump
Prediction of Concrete Properties Using Multiple Linear Regression and Artificial Neural Network [Volume 2, Issue 3, 2018, Pages 27-38]
-
Smart plate model
Fuzzy Vibration Suppression of a Smart Elastic Plate Using Graphical Computing Environment [Volume 2, Issue 1, 2018, Pages 1-17]
-
Soil stabilization
Artificial Neural Networks Prediction of Compaction Characteristics of Black Cotton Soil Stabilized with Cement Kiln Dust [Volume 2, Issue 3, 2018, Pages 50-71]
-
Spatial discretization
Fuzzy Vibration Suppression of a Smart Elastic Plate Using Graphical Computing Environment [Volume 2, Issue 1, 2018, Pages 1-17]
-
Springback
Process Parameter Optimization for Minimizing Springback in Cold Drawing Process of Seamless Tubes Using Advanced Optimization Algorithms [Volume 2, Issue 3, 2018, Pages 72-90]
-
Stem-Stepped Walls
Prediction of Concrete and Steel Materials Contained by Cantilever Retaining Wall by Modeling the Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 47-61]
-
Stream flow forecasting
Stream Flow Forecasting Using Least Square Support Vector Regression [Volume 2, Issue 2, 2018, Pages 56-88]
-
Strength test
Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Pages 31-55]
-
Support vector regression
Stream Flow Forecasting Using Least Square Support Vector Regression [Volume 2, Issue 2, 2018, Pages 56-88]
T
-
Taguchi
Process Parameter Optimization for Minimizing Springback in Cold Drawing Process of Seamless Tubes Using Advanced Optimization Algorithms [Volume 2, Issue 3, 2018, Pages 72-90]
-
The probability of failure
Cone Penetration Based Probabilistic Assessment of Shallow Foundation Settlement [Volume 2, Issue 1, 2018, Pages 85-100]
-
TOPSIS
Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Pages 101-116]
-
Traffic Loading
Comparative Analysis of Rigid Pavement Using Westergaard Method and Computer Program [Volume 2, Issue 2, 2018, Pages 19-30]
U
-
Ultimate bearing capacity
Prediction of Ultimate Bearing Capacity of Skirted Footing Resting on Sand Using Artificial Neural Networks [Volume 2, Issue 4, 2018, Pages 34-46]
-
Uncertainty Quantification
The Gaussian Process Modeling Module in UQLab [Volume 2, Issue 3, 2018, Pages 91-116]
-
UQLab
The Gaussian Process Modeling Module in UQLab [Volume 2, Issue 3, 2018, Pages 91-116]
V
-
Vertical curve
An Analysis of Sight Distances Considering Both the Vertical and Horizontal Curves of a Tourist Bound Destination Highway in Camarines Sur: The Lagonoy-Presentacion Section [Volume 2, Issue 2, 2018, Pages 116-126]
W
-
Westergaard Method
Comparative Analysis of Rigid Pavement Using Westergaard Method and Computer Program [Volume 2, Issue 2, 2018, Pages 19-30]
Your query does not match with any item