[1] Sivakumar A, Santhanam M. A quantitative study on the plastic shrinkage cracking in high strength hybrid fibre reinforced concrete. Cem Concr Compos 2007;29:575–81. doi:10.1016/j.cemconcomp.2007.03.005.
[2] Wittmann FH. On the action of capillary pressure in fresh concrete. Cem Concr Res 1976;6:49–56. doi:10.1016/0008-8846(76)90050-8.
[3] El-Reedy M. Onshore Structural Design Calculations: 9.2.1 Plastic Shrinkage Cracking.Elsevier Ltd. 2017:387–430.
[4] https://assets.master-builders-solutions.basf.com/en-us/hot%20weather%20concreting %20ctif.pdf, last assessed: 27.02.2020. n.d.
[5] ACI Committee 305. Hot-Weather Concreting. ACI 305R-10, American Concrete Institute 2010.
[6] Uno PJ. Plastic shrinkage cracking and evaporation formulas. ACI Mater J 1998;95:365–75.
[7] Sayahi F, Emborg M, Hedlund H. Plastic shrinkage cracking in concrete: State of the art. Nord Concr Res 2014;51:95–110.
[8] Grzybowski M, Shah SP. Shrinkage cracking of fiber reinforced concrete. Mater J 1990;87:138–48.
[9] Mouret M, Bascoul A, Escadeillas G. Strength impairment of concrete mixed in hot weather: relation to porosity of bulk fresh concrete paste and maturity. Mag Concr Res 2003;55:215–23. doi:10.1680/macr.2003.55.3.215.
[10] Zhang J, Hou D, Han Y. Micromechanical modeling on autogenous and drying shrinkages of concrete. Constr Build Mater 2012;29:230–40. doi:10.1016/j.conbuildmat.2011.09.022.
[11] Al-Fadhala M, Hover KC. Rapid evaporation from freshly cast concrete and the Gulf environment. Constr Build Mater 2001;15:1–7. doi:10.1016/S0950-0618(00)00064-7.
[12] Schmidt M, Slowik V. Instrumentation for optimizing concrete curing. Concr Int 2013;35:60–4.
[13] Boshoff WP, Combrinck R. Modelling the severity of plastic shrinkage cracking in concrete. Cem Concr Res 2013;48:34–9. doi:10.1016/j.cemconres.2013.02.003.
[14] Douglas J, Danciu L. Nomogram to help explain probabilistic seismic hazard. J Seismol 2020;24:221–8. doi:10.1007/s10950-019-09885-4.
[15] ACI Committee 207.2R-07. Report on Thermal and Volume Change Effects on Cracking of Mass Concrete, American Concrete Institute, 2007 n.d.
[16] Why Stata, https://www.stata.com/why-use-stata/, last assessed: 01.08.2020 n.d.
[17] Economou P, Batsidis A, Kounetas K. Evaluation of the OECD’s prediction algorithm for the annual GDP growth rate. Commun Stat Case Stud Data Anal Appl 2020:1–21. doi:10.1080/23737484.2020.1805818.
[18] Sharifi Y, Hosainpoor M. A Predictive Model Based ANN for Compressive Strength Assessment of the Mortars Containing Metakaolin. J Soft Comput Civ Eng 2020;4:1–12.
[19] Hornik K, Stinchcombe M, White H. Multilayer feedforward networks are universal approximators. Neural Networks 1989;2:359–66. doi:10.1016/0893-6080(89)90020-8.
[20] Esmailzadeh A, Kamali A, Shahriar K, Mikaeil R. Connectivity and Flowrate Estimation of Discrete Fracture Network Using Artificial Neural Network. J Soft Comput Civ Eng 2018;2:13–26.
[21] Luo X, Patton AD, Singh C. Real power transfer capability calculations using multi-layer feed-forward neural networks. IEEE Trans Power Syst 2000;15:903–8. doi:10.1109/59.867192.
[22] Fractional Polynomial Regression, Chapter 382, https://ncss-wpengine.netdna-ssl.com/wp-content/themes/ncss/pdf/Procedures/NCSS/Fractional_Polynomial_Regression.pdf, last assessed: 01.08.2020. n.d.
[23] Green SB. How Many Subjects Does It Take To Do A Regression Analysis. Multivariate Behav Res 1991;26:499–510. doi:10.1207/s15327906mbr2603_7.