Author Index

A

  • Adedeji, Adeola A. Structural Response of Reinforced Self-Compacting Concrete Deep Beam using Finite Element Method [Volume 2, Issue 1, 2018, Page 36-61]
  • Adsul, Nilam Prediction of Concrete Properties Using Multiple Linear Regression and Artificial Neural Network [Volume 2, Issue 3, 2018, Page 27-38]
  • Akinpelu, Mutiu Structural Response of Reinforced Self-Compacting Concrete Deep Beam using Finite Element Method [Volume 2, Issue 1, 2018, Page 36-61]
  • Al-Ghafri, Intisar H.H. Comparative Analysis of Rigid Pavement using Westergaard Method and Computer Program [Volume 2, Issue 2, 2018, Page 19-30]
  • Aryafar, Ahmad Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Page 101-116]
  • Azimi, Alla An Equation to Determine the Ultimate Flexural Load of RC Beams Strengthened with CFRP Laminates [Volume 2, Issue 4, 2018, Page 86-95]
  • Aziz, Farah Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Page 31-55]

B

  • Banejad, Hossein Application of ANN in Estimating Discharge Coefficient of Circular Piano Key Spillways [Volume 2, Issue 3, 2018, Page 39-49]
  • Barati, Reza Application of adaptive Neuro-fuzzy inference system to estimate alongshore sediment transport rate (A real case study: southern shorelines of Caspian Sea) [Volume 2, Issue 4, 2018, Page 72-85]
  • Bhamare, S. S. Process Parameter Optimization for minimizing Springback in Cold Drawing Process of Seamless Tubes using Advanced Optimization Algorithms [Volume 2, Issue 3, 2018, Page 72-90]
  • Bunyamin, Salahudeen Anigilaje Cone Penetration Based Probabilistic Assessment of Shallow Foundation Settlement [Volume 2, Issue 1, 2018, Page 85-100]
  • Bunyamin, Salahudeen Anigilaje Artificial neural networks prediction of compaction characteristics of black cotton soil stabilized with cement kiln dust [Volume 2, Issue 3, 2018, Page 50-71]

C

  • Charhate, Shrikant Prediction of Concrete Properties Using Multiple Linear Regression and Artificial Neural Network [Volume 2, Issue 3, 2018, Page 27-38]
  • Cui, Wenhua Scale Effect and Anisotropic Analysis of Rock Joint Roughness Coefficient Neutrosophic Interval Statistical Numbers Based on Neutrosophic Statistics [Volume 2, Issue 4, 2018, Page 62-71]

D

  • Dahake, Ajay Flexural Analysis of Deep Aluminum Beam [Volume 2, Issue 1, 2018, Page 71-84]
  • Dutta, Rakesh Kumar Prediction of Ultimate Bearing Capacity of Skirted Footing Resting on Sand Using Artificial Neural Networks [Volume 2, Issue 4, 2018, Page 34-46]

E

  • Eberemu, Adrian O. Artificial neural networks prediction of compaction characteristics of black cotton soil stabilized with cement kiln dust [Volume 2, Issue 3, 2018, Page 50-71]
  • Elbeltagi, Emad Developing Four Metaheuristic Algorithms for Multiple-Objective Management of Groundwater [Volume 2, Issue 4, 2018, Page 1-22]
  • El-Ghandour, Hamdy Ahmed Developing Four Metaheuristic Algorithms for Multiple-Objective Management of Groundwater [Volume 2, Issue 4, 2018, Page 1-22]
  • Esmailzadeh, Akbar Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Page 101-116]
  • Esmailzadeh, Akbar Connectivity and Flowrate Estimation of Discrete Fracture Network Using Artificial Neural Network [Volume 2, Issue 3, 2018, Page 13-26]

F

  • Farahnaki, Reza An Equation to Determine the Ultimate Flexural Load of RC Beams Strengthened with CFRP Laminates [Volume 2, Issue 4, 2018, Page 86-95]

G

  • Gavraskar, Seema Stream Flow Forecasting using Least Square Support Vector Regression [Volume 2, Issue 2, 2018, Page 56-88]
  • Gokkus, Umit Prediction of Concrete and Steel Materials Contained by Cantilever Retaining Wall by Modeling the Artificial Neural Networks [Volume 2, Issue 4, 2018, Page 47-61]

H

  • Heidari, Ali Optimum Design of Structures Against earthquake by Simulated Annealing Using Wavelet Transform [Volume 2, Issue 4, 2018, Page 23-33]
  • Heydari, Majid Application of ANN in Estimating Discharge Coefficient of Circular Piano Key Spillways [Volume 2, Issue 3, 2018, Page 39-49]
  • Hosseinzadeh Gharehgheshlagh, Hojjat Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Page 101-116]

I

  • Ibrahim, Khalid Modeling of Compressive Strength Characteristics of Structural-sized Afara (Terminalia superba) and Babo (Isoberlinia doka) Timber Columns Using Constant Failure Rate (CFR) Model of Reliability [Volume 2, Issue 2, 2018, Page 102-115]
  • Ijimdiya, Thomas S. Artificial neural networks prediction of compaction characteristics of black cotton soil stabilized with cement kiln dust [Volume 2, Issue 3, 2018, Page 50-71]

J

  • Javid, Muhammad Comparative Analysis of Rigid Pavement using Westergaard Method and Computer Program [Volume 2, Issue 2, 2018, Page 19-30]
  • Jiang, Wenzhong Scale Effect and Anisotropic Analysis of Rock Joint Roughness Coefficient Neutrosophic Interval Statistical Numbers Based on Neutrosophic Statistics [Volume 2, Issue 4, 2018, Page 62-71]
  • Jimoh, Alao Abdullahi Modeling of Compressive Strength Characteristics of Structural-sized Afara (Terminalia superba) and Babo (Isoberlinia doka) Timber Columns Using Constant Failure Rate (CFR) Model of Reliability [Volume 2, Issue 2, 2018, Page 102-115]

K

  • Kalwane, Uttam Flexural Analysis of Deep Aluminum Beam [Volume 2, Issue 1, 2018, Page 71-84]
  • Kamali, Abbas Connectivity and Flowrate Estimation of Discrete Fracture Network Using Artificial Neural Network [Volume 2, Issue 3, 2018, Page 13-26]
  • Kapdis, Pravin Flexural Analysis of Deep Aluminum Beam [Volume 2, Issue 1, 2018, Page 71-84]
  • Karanjule, Dadabhau Baban Process Parameter Optimization for minimizing Springback in Cold Drawing Process of Seamless Tubes using Advanced Optimization Algorithms [Volume 2, Issue 3, 2018, Page 72-90]
  • Karim, Izian Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Page 31-55]
  • Kashkaki, Zahra Application of ANN in Estimating Discharge Coefficient of Circular Piano Key Spillways [Volume 2, Issue 3, 2018, Page 39-49]
  • Keshavarz, Zahra Application of ANN and ANFIS Models in Determining Compressive Strength of Concrete [Volume 2, Issue 1, 2018, Page 62-70]

L

  • Lataniotis, Christos The Gaussian process modelling module in UQLab [Volume 2, Issue 3, 2018, Page 91-116]
  • Law, Teik Hua Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Page 31-55]
  • Londhe, Shreenivas Stream Flow Forecasting using Least Square Support Vector Regression [Volume 2, Issue 2, 2018, Page 56-88]

M

  • Marelli, Stefano The Gaussian process modelling module in UQLab [Volume 2, Issue 3, 2018, Page 91-116]
  • Mathews IV, Grady An Interior-Constraint BEM for Regularization of Problems with Improper Boundary Conditions [Volume 2, Issue 2, 2018, Page 1-18]
  • Mehar, Arpan Development of MLR, ANN and ANFIS Models for Estimation of PCUs at Different Levels of Service [Volume 2, Issue 1, 2018, Page 18-35]
  • Mikaeil, Reza Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Page 101-116]
  • Mikaeil, Reza Connectivity and Flowrate Estimation of Discrete Fracture Network Using Artificial Neural Network [Volume 2, Issue 3, 2018, Page 13-26]
  • Mohammed, Kachalla Profiled Composite Slab Strength Determination Method [Volume 2, Issue 2, 2018, Page 31-55]
  • Mullen, Robert An Interior-Constraint BEM for Regularization of Problems with Improper Boundary Conditions [Volume 2, Issue 2, 2018, Page 1-18]
  • Muradova, Aliki Fuzzy Vibration Suppression of a Smart Elastic Plate using Graphical Computing Environment [Volume 2, Issue 1, 2018, Page 1-17]

O

  • Osinubi, Kolawole J. Artificial neural networks prediction of compaction characteristics of black cotton soil stabilized with cement kiln dust [Volume 2, Issue 3, 2018, Page 50-71]

R

  • Raeisi, Jalil Optimum Design of Structures Against earthquake by Simulated Annealing Using Wavelet Transform [Volume 2, Issue 4, 2018, Page 23-33]
  • Rahmon, Rauf Modeling of Compressive Strength Characteristics of Structural-sized Afara (Terminalia superba) and Babo (Isoberlinia doka) Timber Columns Using Constant Failure Rate (CFR) Model of Reliability [Volume 2, Issue 2, 2018, Page 102-115]
  • Rani, Radha Prediction of Ultimate Bearing Capacity of Skirted Footing Resting on Sand Using Artificial Neural Networks [Volume 2, Issue 4, 2018, Page 34-46]
  • Rao, Tammineni Gnanananda Prediction of Ultimate Bearing Capacity of Skirted Footing Resting on Sand Using Artificial Neural Networks [Volume 2, Issue 4, 2018, Page 34-46]
  • Rao, Tianrong H Process Parameter Optimization for minimizing Springback in Cold Drawing Process of Seamless Tubes using Advanced Optimization Algorithms [Volume 2, Issue 3, 2018, Page 72-90]
  • Rizos, Dimitris An Interior-Constraint BEM for Regularization of Problems with Improper Boundary Conditions [Volume 2, Issue 2, 2018, Page 1-18]
  • Romero, Raymundo Vargas An Analysis of Sight Distances Considering Both the Vertical and Horizontal Curves of a Tourist Bound Destination Highway in Camarines Sur: The Lagonoy-Presentacion Section [Volume 2, Issue 2, 2018, Page 116-126]

S

  • Sadegheslam, Golsa Selection of an Appropriate Method to Extract the Dimensional Stones Using FDAHP & TOPSIS Techniques [Volume 2, Issue 1, 2018, Page 101-116]
  • Sadeghifar, Tayeb Application of adaptive Neuro-fuzzy inference system to estimate alongshore sediment transport rate (A real case study: southern shorelines of Caspian Sea) [Volume 2, Issue 4, 2018, Page 72-85]
  • Salunkhe, Umesh Flexural Analysis of Deep Aluminum Beam [Volume 2, Issue 1, 2018, Page 71-84]
  • Shahmoradi Qomi, Hamidreza Reliability Analysis of Structures Using Modified FA_PSO Algorithm [Volume 2, Issue 2, 2018, Page 89-101]
  • Shahriar, Kurosh Connectivity and Flowrate Estimation of Discrete Fracture Network Using Artificial Neural Network [Volume 2, Issue 3, 2018, Page 13-26]
  • Solang, Uwera Refined Simplified Neutrosophic Similarity Measures Based on Trigonometric Function and Their Application in Construction Project Decision-Making [Volume 2, Issue 3, 2018, Page 1-12]
  • Srikanth, Seelam Development of MLR, ANN and ANFIS Models for Estimation of PCUs at Different Levels of Service [Volume 2, Issue 1, 2018, Page 18-35]
  • Stavroulakis, Georgios Fuzzy Vibration Suppression of a Smart Elastic Plate using Graphical Computing Environment [Volume 2, Issue 1, 2018, Page 1-17]
  • Subhedar, Mansi Prediction of Concrete Properties Using Multiple Linear Regression and Artificial Neural Network [Volume 2, Issue 3, 2018, Page 27-38]
  • Sudret, Bruno The Gaussian process modelling module in UQLab [Volume 2, Issue 3, 2018, Page 91-116]

T

  • Taheri, Majid Reliability Analysis of Structures Using Modified FA_PSO Algorithm [Volume 2, Issue 2, 2018, Page 89-101]
  • Tairidis, Georgios Fuzzy Vibration Suppression of a Smart Elastic Plate using Graphical Computing Environment [Volume 2, Issue 1, 2018, Page 1-17]
  • Torkian, Hojjatollah Application of ANN and ANFIS Models in Determining Compressive Strength of Concrete [Volume 2, Issue 1, 2018, Page 62-70]

V

  • Voitenko, Pavlo Reliability Analysis of Structures Using Modified FA_PSO Algorithm [Volume 2, Issue 2, 2018, Page 89-101]

Y

  • Ye, Jun Refined Simplified Neutrosophic Similarity Measures Based on Trigonometric Function and Their Application in Construction Project Decision-Making [Volume 2, Issue 3, 2018, Page 1-12]
  • Ye, Jun Scale Effect and Anisotropic Analysis of Rock Joint Roughness Coefficient Neutrosophic Interval Statistical Numbers Based on Neutrosophic Statistics [Volume 2, Issue 4, 2018, Page 62-71]
  • Yildirim, Mehmet Prediction of Concrete and Steel Materials Contained by Cantilever Retaining Wall by Modeling the Artificial Neural Networks [Volume 2, Issue 4, 2018, Page 47-61]
  • Yilmazoglu, Arif Prediction of Concrete and Steel Materials Contained by Cantilever Retaining Wall by Modeling the Artificial Neural Networks [Volume 2, Issue 4, 2018, Page 47-61]